| |
Automation Control Module
-
ELK9100
ELK-9100
Heavy Duty Remote Controlled Relay
|
The 9100 “ULTRAMATE” responds to powerline carrier (X10) signals over the AC lines. It can control a single 220-240VAC circuit or two separate 110-120VAC circuits. Built-in signal bridging and optional repeater functionality enhances the reliability of X10 operations. Ideal for general purpose switching of high current loads such as electric water heaters, baseboard heat, air conditioners, pumps, etc.
|
• Remotely controllable from X10 Commands
• Low Voltage Contact Closure Activation
• 30 Amp Long Life, Double Pole Relays
• Color coded 18", #10 AWG, MTW, stranded nickel plated copper wires
• Size: 4.36” W x 6.36” H x 2.0” D
|
• Control One 220-240 Volts AC Device OR Two 115-120 Volts AC Devices
• LED Status indicator for X10 signal and for each switching circuit
• Built-in signal bridging
• Lifetime Limited Warranty
• Manual Override Switch
|
-
ELK930
ELK-930
Doorbell & Telephone Ring Detector
|
Detects doorbell and/or telephone ring to trigger automation events.
|
• Max Doorbell Input: 24 Volts AC Nominal
• Doorbell Detection Current: 900mA min
• Max Output: 40mA @ 12 Volts DC
• Size 3.4" x 2.75" x .625"
|
• Snap apart board includes: (2) doorbell sensors and (1) phone sensor
• Double Sided Foam Mounting Tape Included
• Packaged in Reusable Poly Storage Box
• Lifetime Limited Warranty
|
-
ELKMB485
ELK-MB485
RS-232 to RS-485 Data Converter
|
The ELK-MB485 is used to communicate between a personal computer and an ELK Magic Module (ELK-MM443). The ELK-MB485 converts the computer's RS-232 Serial Data to RS-485 Data which is used by the ELK Magic Moduleā?¢ series of products.
|
• Operating Voltage: 10.5 - 15 Volts DC, supplied from ELK-MM443
• Current Draw: 40 mA DC, supplied from ELK-MM443
• Enclosure Size: 4.5" x 3" x 1.2"
|
• Converts RS-232 to RS-485 Data
• Visual Power Indicator LED
• Data Interconnect Cable (4 Pin) included
• Computer Serial Cable (9 Pin) included
• Surface Mount ABS Enclosure with Snap-On Cover
|
-
ELKMC100
ELK-MC100
Magic Module™ Clock/Calendar Module
|
Real time clock add-on accessory for the Magic Module™ programmable controller series.
|
• Includes Battery: 3 Volt Lithium (CR2032)
• Powered from Magic Module™.
• Operating Voltage: 5 Volts DC
• Current Draw: 200uA DC
• Size: 2.2" W x 1.5" H x 1" D
|
• Adds Clock/Calendar Functions
• Works with ELK-MM443 or ELK-MM447
• Daylight-Savings Time Program Option
• Automatic Leap Year Adjustment
• On-board Connection for Temperature Sensor Module (ELK-MT100) (optional)
|
-
ELKMM220
ELK-MM220
Magic Module™ Two Input Programmable Controller
|
Low cost, programmable controller can be a dual time delay relay, process controller, single zone security control, etc. Programs are written using the ELK-MK400 Development Kit.
|
• 2 Digital Inputs
• 2 Relay Outputs
• 4 counters: 0 to 255 increments
• 4 timers: 1/10 second to over 255 hours
• Operating Voltage: 12Volts DC
|
• 4096 program bytes using SIMPLE programming language
• Shipped pre-programmed as a single zone alarm control
• Non-volatile EEProm memory
• Surface Mount Black Enclosure
• Lifetime Limited Warranty
|
|
