| |
Diversified Technology Group
Robert McIntyre founded DITEK Corporation in Largo, Florida more than 17 years ago. Bob had been the co-owner of a surge company for more than 20 years when he founded DITEK. He realized there was a need and demand for quality US-built surge protectors and began to build and invest in the research and design of the best quality products possible.
A passion for innovation drives DITEK’s continued growth and market penetration. The company’s product designs are always at the forefront of current technology due to frequent input from industry leaders who design, manufacture, and install video surveillance, fire and intrusion detection, access control and building automation systems.
|
1720 Starkey Road
Largo, FL 33771
(800) 753-2345
fax (727) 812-5000
www.ditekcorp.com
Technical Support
Randall Raszick
(727) 812-5000
randall.raszick@ditekcorp.com
|
-
DITDTK120240GP
AC Power Surge Arrester
|
This surge arrester offers economical protection for single or split phase gate motors and is designed to survive extreme environments.
|
• Agency Approvals: UL-OWHX
• MCOV: 130/360VAC
• Service Voltage: 120/240V Split
• Continuous Current: Unlimited (parallel connection)
• Max Surge Current: 100,000 Amps
|
• 120/240V split phase or 120V single phase applications
• Weather Proof enclosure designed for hostile outdoor environments
|
-
DITDTK120HW
Hardwire 120 Volt Surge Protector
|
Recommended by major alarm panel manufacturers to protect 120 Volt power to the fire alarm panel
|
• Ten Year Warranty
• MCOV:130VAC
• Agency Approvals: UL-1449, cUL
• Continuous Current: Unlimited (parallel connection)
• Max Surge Current: 22,500 Amps
|
• Parallel connection maintains power to the system
• Diagnostic indicator confirms ground presence, unit function and power on
• Small footprint - can be used in a variety of applications
|
-
DITDTK120S15A
Hardwire 120 Volt Series Surge Protector
|
The 120S15A surge protector is a true multi-stage series hybrid design which provides the best filtering and lowest clamp levels in its class. The 120S15A meets both government and military specs for power protection of fire panel applications.
|
• Agency Approvals: Wyle Labs tested to UL1449
• Service Voltage: 110-120 VAC or 120/240 VAC
• MCOV: 130VAC or 130/260 VAC
• Continuous Current: 15 or 20 Amps (specify)
• Max Surge Current: 39,000 Amps
|
• Also available in 20 Amp model -DTK-120S20A
• Excellent RFI/EMI Filtering - improves equipment performance
• Multiple diagnostic indicators monitor protection status, ground presence, ground fault, and fuse status
• User replaceable fusing - less " post event" downtime and longer service life
• Hybrid circuitry - four state protection ensures maximum performance
|
-
DITDTK1F31X
Plug-In AC Power & Telco Surge Protector
|
Designed and built for professional alarm panel installers, the 1F31X protects the 12- volt power and telephone line.
|
• Service Voltage: Power 110 - 120VAC, Telco <105VAC
• MCOV: Power 130VAC, Telco 130VAC
• Continuous Current: Power 15 Amps, Telco 0.150 Amps
• Max Surge Current: Power 13,500 Amps, Telco 240 Amps
• Protection Modes: Power L-N, L-G, NL-G Telco L-G (all)
|
• 1 pair In /Out screw terminal connection for tip and ring
• Diagnostic indicator confirms ground presence, unit funtion and power on
• Protects telephone dialer and power in on plug-in unit
• Designed for residential alarm applications where telco ground is not easily accessible
|
-
DITDTK1LVLPLV
Hardwire Low Voltage Surge Protector
|
The most widely used devices for protecting life safety equipment. LVLP's can handle virtually any voice, data or signal application.
|
• Agency Approvals: UL497A, UL497B (specify)
• Operating Voltage: 24V (LVLPLV version)
• Continuous Current: 0.15 Amps (SCP), 5 Amps (Non-SCP)
• Response Time: <5ns
• Protection Modes: L-G (All)
|
• Available in variants to protect 1, 2, 4 or 8 pairs
• Voltage levels available: 6V, 14V, 30V, 50V, 75V, 95V and 130V
• See spec sheet for more details
|
|
