Detects the presence of carbon monoxide in the air.
Listed to UL Standard 2075 for CO detectors.
Tested to UL Standard 2034 for CO detectors.
MEA-approved
Suface mounts to a wall over a single gang electrical box
Flush mounts to the wall over a 4X4 or two gang electrical box
Simple visual display for easy identification of potential harzardous condition
Compatible to use with UL Listed Alarm Control Panels
Inexpensive and easy to install
Small and discreet size that looks similar to a thermostat
Long life sensor with no maintenance or periodic sensor replacement needed.
MACCM21A CM-21A
Carbon Monoxide Detector and Controller
Carbon monoxide detector and ventilation controller, stand-alone or for use with systems
Linearity: ± 10%
Repeatability: ± 10% at 50 ppm calibration point
Operating Environ: 0 to 125 F, 10 to 90 % RH
Alarm relay actuation: 100 ppm CO after 30 min., 200 ppm CO after 10 min.
Alarm relay: 0.5 amp 200 V, 10 VA
Dual relays: fan (SPDT) & alarm (N.O.)
Automatic ventilation controller
SPDT fan relay switches 5 amps
Low maintenance, no periodic calibration needed
Lights reflect system status
MACCMS1 CMS1
Fixed carbon monoxide detector
UL listed and MEA approved CO detectors for use with fire and security alarm systems.
12-24 VDC current
3-1/8" x 5-1/8" x 1-1/2"
Alarm Relay: SPDT, 1 Amp, 60 VDC, 60 VA
Buzzer Rating: 85 dBA at 10 feet
UL 2075 listed, MEA Approved
UL 2075 listed, MEA Approved
Aesthetic contours with flush or surface mount options
Speed Mount Installation with simple harness clip
7-10 year solid state sensor
12/24 dual voltage compatibility
SYSCO1224 CO1224
Carbon Monoxide Detector
4-wire, 12/24 volt system-connected CO detector
Designed for system operation
12/24 volt operation
Current draw: 20 mA standby, 40 mA alarm
Fully listed to UL 2075
Code required trouble relay and wiring supervision
SEMS type terminals provide a quicker and more positive wiring connection
Low current draw
Versatile mounting options - wall, ceiling, or single gang box