AIPHIDSS HID-SS
Accessory Station with Embedded HID® Proximity Card Rea
Door station with built in HID prox reader
• 2-gang flush mount
• 12 gauge stainless steel
• Vandal & Weather resistant
• Standard Wiegand output to access panel
• ProxPoint® embedded proximity card reader
• Door intercom station with built in prox reader
• Two separate units not required
COR4341 4341
Data Chip System - Single-Gang Two LED
Touch card for access control
• Supports Request-to-Exit
• Operates on 12VDC
• Relay Output is Momentary or Latching
• Supports 17 Distinct Data Chip Users
• Single-gang, Flush Mount with One Green and Red LED
• Limits Access to Chip Holders Only
• Supports Timed Access or On/Off Access to Areas
• Integrates to Most Low Voltage Applications
• Supports Egress Device from Inside Out
• Any Data Chip Can Access in Lower Security Applications
COR4343 4343
Data Chip System - Mullion Two LED
Touch card for access control
• Supports 17 Distinct Data Chip Users
• Relay Output is Momentary or Latching
• Operates on 12VDC
• Supports Request-to-Exit
• Features Unlimited Users Mode
• Limits Access to Chip Holders Only
• Supports Timed Access or On/Off Access to Areas
• Integrates to Most Low Voltage Applications
• Supports Egress Device from Inside Out
• Any Data Chip Can Access in Lower Security Applications
Universal Proximity IPR Series
Universal Weigand Proximity Readers
These proximity readers are intented to be applied in different access control systems, using RS232, Wiegand 26, Wiegand 37, or Wiegand 42 interfaces.
• 9 to 16 Volts
• Read range from 4" to 7"(IPR9
• Read range 1.3" to 1.6" (IPR3)
• Temperture range: -31 degrees F to 149 degrees F
• Dimensions: 6.1" x 1.77" x .87" for IPR 8
• Weather resistant
• Durabale ABS Plastic(IPR8-IPR9)
• IPR-03 is made from1.5mm stainless steel
• Vandal Resistant
• Suitable for interior and exterior use
ELK106055 ELK-106055
Exterior Proximity Reader
Allows a proximity card or fob to be used with the M1 to quickly arm, disarm, operate a door strike, etc.
• Size: 3 1/8" H x 1 7/8" W x 1" D
• Operating Voltage: 12 VDC
• Current Draw: 50mA
• Color: Black
• Weatherproof - suitable for outdoor installation
• Can be used on any system that is Wiegand 26 bit compatible
• Easily connects to any ELK-M1KP LCD Keypad
• Requires ELK-M1PRC cards or ELK-M1PRF fobs
